How to maintain and maintain the C6140 horizontal lathe of Zaozhuang Make Machinery Co., Ltd.

How to maintain and maintain the C6140 horizontal lathe of Zaozhuang Make Machinery Co., Ltd.

1. Clean

1. Disassemble and clean the various oil felt pads;

2. Wipe the sliding surfaces and guide rail surfaces of ordinary lathes, wipe the worktable and the horizontal direction, lift the screw, wipe the knife drive mechanism and the knife holder.

2. Regular lubrication

1. The oil holes are clean and unobstructed and filled with lubricating oil;

2. Add lubricating oil to each guide rail surface, sliding surface and each screw rod;

3. Check the oil tank body and oil level of the transmission mechanism and add oil to the elevation position.

3. Tighten the fasteners of C6140 ordinary lathe of Zaozhuang Make Machinery Co., Ltd.

1. Check and tighten the pressure plate and insert screws;

2. Check and tighten the slider fixing screws, the knife drive mechanism, the handwheel, and the workbench bracket screws;

3. Check the other parts of the button to loosen the screws.

Four, adjustment

1. Check that the tightness of Hongrui's adjustment belts, pressure plates and inserts is appropriate;

2. Check and adjust the sliding block and screw rod order.

Five, anti-corrosion

1. Remove the rust of each part, protect the painted surface, and avoid collision;

2. Out-of-service, spare equipment guide rail surface, sliding screw hand wheel and its exposed parts that are easy to rust

As a company with more than 20 years of experience in machinery production, Zaozhuang Make Machinery Co., Ltd. has strict control over the quality of its products. Zaozhuang Make Machinery Co., Ltd. will serve you wholeheartedly!

The models we are selling are KL36B-100, KE1-60, KE2-60, etc. Welcome to buy!