Selection of roughness of products processed by slotting machine

Selection of roughness of products processed by slotting machine

For the surface roughness of traditional products processed by Zaozhuang Make Machinery Co., Ltd., economy and machinability must be considered. We can’t do production regardless of cost, so what are our principles! At present, we have seven principles and we can make choices for everyone.

   1. Zaozhuang Make Machinery Co., Ltd. should choose a relatively high surface roughness value while meeting the requirements and appearance as much as possible.

   2. In general, the roughness of the friction surface is lower than that of the non-friction surface.

   3. When processing some grooves or rounded corners, the surface roughness should be relatively low.

  4. When the mating properties are required to be stable and reliable, the surface roughness of the parts should be relatively low.

  5. The surface roughness of the matching parts should be coordinated with the shape tolerance and dimensional tolerance.

  6. When the dimensional tolerance level is the same, the surface roughness of the shaft is lower than that of the hole.

  7. Under working conditions such as corrosive gas, the surface roughness of the parts should be relatively low.

   The above seven principles will help Zaozhuang Make Machinery Co., Ltd.'s slotting machine to produce products that meet customer requirements!

The slotting machine models produced by Zaozhuang Make Machinery Co., Ltd. are XC-100, XC-125, and accessory plugs SL-100, SL-125. Thank you for choosing our products!