Usage of pipe bending machine in Zaozhuang Make Machinery Co., Ltd.

(1) Refer to the operation manual of electric oil pump.

(2) First, screw the working cylinder into the internal thread of the square block to make the rear end of the oil cylinder installed on the bracket downward.

(3) Select the die head according to the outer diameter of the bent pipe, put it on the plunger, put the corresponding groove of the two roller shafts towards the die head, put it into the flower plate hole of the corresponding size, cover the upper plate, insert the bent pipe into the groove, and then pull the quick connector (movable part of the high pressure oil pipe end backward and cover it on the joint of the working oil cylinder, and screw down the oil drain screw on the electric oil pump It can be bent. After bending, loosen the drain screw and the plunger will reset automatically.

The pipe bending machine JGWG-40Z,JGWG-50Z,JGWG-80Z,JGWG-110Z and other models produced by Zaozhuang Make Machinery Co., Ltd. are on sale!

Welcome new and old customers to consult!